Battery Energy Storage
Management System (EMS)
Comprehensive BESS Energy Management System with cell-level BMS integration, AI-optimized dispatch strategies, and full grid code compliance. Supports lithium-ion (NMC, LFP), flow batteries, and hybrid storage configurations.
Dispatch Strategies
Six AI-optimized dispatch strategies for maximum value extraction
Peak Shaving
Reduce peak demand charges by up to 40% through intelligent pre-charging based on load forecasts and time-of-use tariff optimization.
Frequency Regulation
Primary and secondary frequency regulation with <100ms response time. Automatic FFR dispatch based on ROCOF detection.
Energy Arbitrage
Day-ahead and intraday market optimization. Charge during low-price periods, discharge during high-price windows.
Renewable Smoothing
Ramp rate control to smooth solar/wind variability. Configurable ramp rate limits (MW/min) for grid code compliance.
Voltage Support
Reactive power injection/absorption for voltage regulation at the point of connection. Q(U) characteristic support.
Black Start
Island mode formation capability with BESS as grid-forming source. Seamless transition from grid-connected to island mode.
Battery Management System (BMS) Integration
Deep BMS integration for cell-level visibility and protection
Cell-Level Monitoring
- Individual cell voltage (±1 mV accuracy)
- Cell temperature (±0.5°C accuracy)
- State of Charge (SOC) per cell
- State of Health (SOH) estimation
- State of Power (SOP) calculation
- Cycle count and calendar aging
Protection Functions
- Over/under voltage protection
- Over-current protection (charge/discharge)
- Over-temperature protection
- Short circuit protection (<1ms)
- Ground fault detection
- Insulation resistance monitoring
Thermal Management
- Active cooling/heating control
- Thermal runaway detection
- Pre-conditioning for cold weather
- Thermal gradient monitoring
- Fire suppression interface
- Ventilation control integration
Communication & Integration
- CAN Bus (ISO 15765)
- Modbus TCP/RTU
- IEC 61850 MMS/GOOSE
- MQTT for cloud connectivity
- REST API for EMS integration
- OPC-UA for SCADA integration